Top of page.

New install kits; Streamlined installation for water dispenser setup.

Introducing Borg & Overström’s new installation kits, now condensed into just four options, making it easier for you to select the right one for your dispenser. In this article, we describe how you can streamline your installation for our filtered, water dispensers.

As part of our continuous work to reduce waste, improve customer experience and offer efficient modularity across our systems we have condensed the number of install kit options we supply. Tailored install kits with specifically selected 3M filters are available for hot dispense, high capacity and increased infection control, designed to streamline installation for water dispenser setup.

Each kit has everything you need to install a Borg and Overström dispenser, for a quick and simple setup. 

ProCore® Chilled Install Kit

ProCore® Chilled Install Kit for streamlined installation of water dispensers.

Suitable for the ProCore® T-series and E4 50L/hr dispensers, without a hot water dispense option. Designed to streamline the installation of your water dispenser. Includes a 3M AP2 filter for enhanced water purity.

Product code 720231

Containing:  611421 3M AP2 Filter Head, AP2-C401-G 1 Micron Filter Cartridge, Rubber Washer 19mm OD/9mm ID x 3mm, 1/2″ Female x 3/4″ Male Reducing Bush Black 3/4BSPM x 3/8BSPF Adapter, Water block (2-30 LPM) Leak Prevention Device 3/4″ BSP x 3/4″ BSPM, 1/4″ Pipe – Black, Shut Off Valve 11/4″ Push Fit, Female Tap Adaptor 1/4″ Push Fit x 3/4″, Stem Reducer 1/4″ Push Fit x 5/16″, Stem Elbow 1/4″ x 1/4″, M4 x 12mm Pan Head PoziDriv Machine Screw, 3.9 x 13 Pozi Pan Self Tapping Screw, Nut M4 BZP, Locking Clip 1/4″

ProCore® Hot Install Kit

Suitable for the ProCore® 50L/H or ProCore®+ 80 L/HT3 or E-series dispenser with a hot dispense option.

Includes a 3M Scale Guard Ion Exchange, designed to reduce scale build up.

Product code 720233

ProCore® Hot Install Kit for streamlined installation of water dispensers.

Containing: Rubber Washer 19mm OD/9mm ID x 3mm EPDM (WRAS Approved), 1/2″ Female x 3/4″ Male Reducing Bush Black, 3/4BSPM x 3/8BSPF Adapter, Waterblock (2-30 LPM) Leak Prevention Device 3/4″ BSP x 3/4″ BSPM, Tap Adaptor 3/8″ Push Fit x 3/4″ BSP, 3/8″ JG Blue Pipe, Stem Elbow 3/8″ x 3/8″ PF, Shut Off Valve 3/8″ Push Fit, M4 x 12mm Pan Head PoziDriv Machine Screw, 3/8″ PF x 5/16″ Stem Reducer, Locking Clip 3/8″, AP3 Filter Head (Premium), 3M Scalegard Ion Exchange Replacement Filter Cartridge (SGP195) – No Bypass, Nut M4 BZP, 3.9 x 13 Pozi Pan Self Tapping Screw 

ProCore® Carbonless Install Kit

ProCore® Carbonless Install Kit for streamlined installation of water dispensers.

Suitable for the ProCore® E6 Chilled only dispenser. Designed to streamline the installation of your water dispenser. Includes a 3M carbonless filter, designed to maintain chlorine levels for the ultimate hygiene. Also compatible with other E-series models without hot dispense options.

Product code 720552

This kit has been created to suit the Healthcare and other intense risk environments – it includes a specialist high-flow Carbonless filter from 3M – designed to maintain chlorine levels present in the incoming water while providing critical protection from protozoan cysts and scale damage. 

ProCore® + Chilled Install Kit 

ProCore® + Chilled Install Kit for streamlined installation of water dispensers.

Suitable for the ProCore®+ T-series, C-series and E6 without a hot water dispense option. Designed to streamline installation of your water dispenser. Includes a 3M AP3 filter for enhanced water purity.

Product code 720232

Containing: AP3 – C765 Filter Cartridge and Filter Head, Rubber Washer 19mm OD/9mm ID x 3mm EPDM (WRAS Approved), 1/2″ Female x 3/4″ Male Reducing Bush Black 451280, 3/4BSPM x 3/8BSPF Adapter, Water block (2-30 LPM) Leak Prevention Device 3/4″ BSP x 3/4″ BSPM, Female Tap Adaptor 3/8″ Push Fit x 3/4″ BSP, 3/8″ JG Blue Pipe, Stem Elbow 3/8″ x 3/8″ PF, Shut Off Valve 3/8″ Push Fit, M4 x 12mm Pan Head PoziDriv Machine Screw, 3/8″ PF x 5/16″ Stem Reducer, Locking Clip 3/8″, 3.9 x 13 Pozi Pan Self Tapping Screw, Nut M4 BZP 

ProCore®/ProCore®+ Dual-Inlet Install Kit

Suitable for the T3 and Porpoise ProCore® 50L/hr and ProCore® + 80 L/hr with a dual inlet, separating the cold, ambient and sparkling feed from the hot water inlet. Designed to streamline installation of your water dispenser. Includes a 3M AP3 filter for enhanced water purity and a 3M Scale Guard Ion Exchange, designed to reduce scale build up.

Product code 720850

Containing: 3M Scalegard Ion Exchange Replacement Filter Cartridge and Filter Head (SGP195) AP3 – C765 Filter Cartridge and Filter Head, Rubber Washer 19mm OD/9mm ID x 3mm EPDM (WRAS Approved), 1/2″ Female x 3/4″ Male Reducing Bush Black 451280, 3/4BSPM x 3/8BSPF Adapter, Water block (2-30 LPM) Leak Prevention Device 3/4″ BSP x 3/4″ BSPM, Female Tap Adaptor 3/8″ Push Fit x 3/4″ BSP, 3/8″ JG Blue Pipe, Stem Elbow 3/8″ x 3/8″ PF, Shut Off Valve 3/8″ Push Fit, M4 x 12mm Pan Head PoziDriv Machine Screw, 3/8″ PF x 5/16″ Stem Reducer, Locking Clip 3/8″, 3.9 x 13 Pozi Pan Self Tapping Screw, Nut M4 BZP 

There are just five codes to choose from and we’ve included a handy table below to help you choose the right installation kit code for your product. 

Please also find this handy table which demonstrates the discontinued codes, and highlights the new product codes to replace them with.  

Should you require any assistance with the upgraded codes, our support team is readily available to help via phone or video call.

Please call us at +44 (0) 1362 695 006 or reach out via email at [email protected], and we will respond promptly. 


Our drinking water dispensers are available through selected partners